February 24, 2021

Observing a handful of rules for accurate installation is crucial for the trusted and good operation from the gearbox or gear motor.
The guidelines set out here are meant as a preliminary manual to picking out gearbox or gear motor. For efficient and proper set up, stick to the guidelines provided from the set up, make use of the maintenances manual to the gearbox available from our revenue department.
Following can be a quick outline of set up guidelines:
a) Fastening:
Place gearbox on a surface supplying ample rigidity. Mating surfaces must be machined and flat.
Mating surfaces have to be within definite geometric tolerances (see guide). That is primarily true of flange-mounted gearboxes with splined hollow shafts.
In applications that involve large radial loads with the output finish, flange mounting is suggested for some gearbox sizes as this mounting can make use of the double pilot diameters provided in these gearboxes.
Ensure that the gearbox is appropriate to the necessary mounting place.
Use screws of resistance class 8.eight and in excess of to safe the gearbox. Torque up screws to your figures
indicated during the related tables.
With transmitted output torque better than or equal 70% from the indicated M2max torque, and with
frequent movement reversals, use screws with minimum resistance ten.9.
Some gearbox sizes is usually fastened utilizing either screws or pins. Of pin seated within the frame the gearboxes be no less than one.5 times pin diameter.
b) Connections
Safe the connection parts to gearbox input and output. Don’t tap them with hammers or equivalent tools.
To insert these elements, use the service screws and threaded holes provided on the shafts. Be sure you clean off any grease or protects from your shafts in advance of fitting any connection components.
Fitting hydraulic motors.
Be cautious the O ring amongst motor flange and gearbox input flange when assembling. Set up the
hydraulic motor before filling lube oil into the gearbox.
Connecting the hydraulic brake.
The hydraulic circuit need to be such to be sure that brake is launched instants prior to gearbox commences and utilized right after gearbox has stopped. Test that strain within the hydraulic line for brake release is at zero whenever gearbox is stopped.
Course of rotation
Motors are connected for the appropriate electric or hydraulic circuit based on their route of rotation.
When performing these connections, bear in mind that all gearboxes, whether while in the in-line or ideal angle style, possess the same course of rotation both at input and output. For extra specifics of the connection of electric and hydraulic motors, see related sections within this catalogue.