Select Page

Why Coupling Grease?
Adequate lubrication is crucial for satisfactory gear coupling operation. Gear Coupling Grease is specifically intended for gear coupling applications to boost coupling existence even though significantly decreasing upkeep time. Its large viscosity base oil and tackifier mix to help keep the grease in location and protect against separation and it truly is in comprehensive compliance with NSI/AGMA 9001-B97 lubrication recommendations.
Coupling Grease is dark brown in shade and produced with a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to high centrifugal forces commonly identified in couplings. Bearing or standard goal greases are inclined to separate and eliminate effectiveness as a consequence of large centrifugal forces about the different components at substantial rotational speeds. These high centrifugal forces encountered in couplings separate the base oil in the thickeners. Hefty thickeners, which have no lubrication qualities, accumulate during the gear tooth mesh region leading to premature coupling failure. Gear Coupling Grease is built to remarkably resistant to centrifugal separation on the oil and thickener, which makes it possible for the lubricant to get applied for a rather long period of time.
Among the secrets and techniques on the accomplishment of Gear Coupling Grease is the variable consistency throughout the operating cycle with the application. The consistency of our gear coupling grease adjustments with the operating disorders. Working in the lubricant beneath actual support disorders brings about the grease to come to be semi-fluid, functionally solash lubricating the dress in surfaces with the coupling. Because the grease cools, it returns on the original consistency, therefore stopping leakage.
Gear Coupling Grease is obtainable from stock in 14 oz. cartridges, one lb. and five lb. cans.
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust safety
Higher load carrying capabilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in area under high speeds
Resistance to centrifugal separation
Reduction in down time & servicing cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated having a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.