Select Page

Electrical  Custom  made in China - replacement parts -  in Kirov Russian Federation  AC Cross Flow Fan Motor for Evaporation Air Conditioner with top quality

We – EPG Group the largest gearbox & motors , couplings and gears factory in China with 5 different branches. For a lot more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~thirteen 571 88828 13858117778 571 88828

 

AC longlife Substantial Effectiveness Cross Flow Fan 

Product characteristic:
1. Stator measurement is optional
2. Secure, dependable, minimal sounds, excellent starting up, extended existence
3. Robust energy
Rated voltage one hundred ten~120V/220~240V-fifty/60Hz

Normal employed: 
Cross blower motors use on frequently Heater, Air cooling Enthusiast and so forth
Volt(v)=110V-240v
Freq(HZ)=50/60HZ
Existing(A)=.18-.43 based mostly on various stator thickne
Enter power on loading: From 13W to 36W based mostly on distinct stator thickness
Torque: 60g. Cm to 120g. Cm primarily based on distinct stator thickness

Shaft diameter(mm)=4-6mm
Shaft length(mm)=according to customer’s prerequisite
Speed(r/min): 2600-3400 based on distinct stator thickness
Fan Diameter: 60mm
Enthusiast length: Optional from 120mm to 360mm
 

Design AOF Size SHAFT DIA VOLT Input Power TORQUE (g.cm) Speed RATED
 
YJ6012 12mm 4mm one hundred ten-240V 18W 120 3000RPM
YJ6014 14mm 4.5mm one hundred ten-240V 25W one hundred fifty 3000RPM
YJ6016 16mm four.5mm 110-240V 30W one hundred eighty 3000RPM
YJ6571 20mm 5mm one hundred ten-240V 35W 260 3000RPM
YJ6571 25mm 6mm a hundred and ten-240V 45W 350 3000RPM
YJ6030 30mm 6mm a hundred and ten-240V 53W 380 3000RPM
 

ABOUT US

Ritscher team was set up in 2006.we constantly target on micro-motors for family electrical equipment and market appliance since setting up.currently we have two skilled micro-motor factories in China  which severally located in HangZhou metropolis and HangZhou town.it has an area of 25,000 square meters plants and much more than three hundred personnel, yearly output  is 3 million pcs and has 5 million pcs annual creating capability.following many a long time improvement,we experienced created a wonderful status in the industry and obtained more and far more customers’  trust in the world.
We  began from shaded pole motors  at commencing, up to now,our merchandise  included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our merchandise  are commonly utilized for generating refrigerators, freezers, micro-wave ovens, air heaters, air exhausters, ventilators,ovens, air filter, massage devices and numerous other equipments.
As a realiable good quality warranty,Ritscher has total R&D departement,QC office,creating division,buy office and so forth. has perfect making gear like Aluminum diecasting, Zinc diecasting, Sheet steel stamping, Plastic injection molding and many others. also test/ detection system like multiplex temp measuring device, functionality parameter inspection unit, Phenol peptide remedy pinhole tester,Anechoic place and many others.
 
Endeavoring to give the best item and service to customers,we constantly do the most hard work to turn out to be an excellent manufacturer of micro motors.
Ritscher is usually ready to create honest enterprise relationship with friends from all above the entire world.
Welcome get in touch with with us!
 
Consider ritscher ,get pleasure from modern daily life!

Our organization FAQ for you

(1) Q: What type motors you can give?
A:For now,we mostly provide Kitchen Hood Motor,DC Motor,Gear Motor,Fan Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor and so on.

(2) Q: Is it achievable to visit your factory
A: Confident. But make sure you kindly maintain us posted a few times in progress. We need to examine our
schedule to see if we are obtainable then.

(3) Q: Can I get some samples
A: It relies upon. If only a handful of samples for individual use or substitute, I am scared it will
be challenging for us to offer, because all of our motors are custom produced and no stock
accessible if there is no additional requirements. If just sample screening ahead of the official buy and
our MOQ, price tag and other conditions are suitable, we’d really like to supply samples.

(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is amongst one thousand~10,000pcs for various models soon after sample acceptance.
But it truly is also okay for us to acknowledge smaller sized plenty like a handful of dozens, hundreds or thousands
For the first 3 orders right after sample approval.For samples, there is no MOQ prerequisite. But the considerably less the far better (like no much more than 5pcs) on problem that the quantity is adequate in scenario any alterations necessary after first testing.

 

The use of original gear manufacturer’s (OEM) portion numbers or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our business and the listed substitution elements contained herein are not sponsored, authorized, or produced by the OEM.

Electrical  Custom  made in China - replacement parts -  in Kirov Russian Federation  AC Cross Flow Fan Motor for Evaporation Air Conditioner with top quality

Electrical  Custom  made in China - replacement parts -  in Kirov Russian Federation  AC Cross Flow Fan Motor for Evaporation Air Conditioner with top quality