Equiped that has a reversible motor, a bidirectional gear pump, double P.O. checke valves, relief valves in addition to a tank, this electrical power unit can drive a double acting cylinder to extend and retract without a directional solenoid valve. It’s usually used in recre-ational vehicles, pleasure boats and moveable stages, and so on.
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all the hydraulic elements concerned prior to set up of the energy unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which need to also be clean and free of charge of impurities. N46 hydraulic oil is suggested.
4. The electrical power unit shown is made to be mounted horizontally.
5. Oil transforming is required immediately after the initial 100 operation hrs, afterwards as soon as every 3000 hours.
six. Check the oil level within the tank following the first operating of your energy unit.